Bather Loads

Requirements vary by state.

When states do not call for specific maximum bather load numbers, it is CH standard for areas with 5’-0” or less water, there must be 15 square feet per bather. With 5’-0” or more water, there must be 25 square feet per bather.  Subtract 300 square feet for each diving board.

Some state codes will have increased bather capacities based on the amount of deck area provided.

Fixture Counts

Fixture counts vary by state and type of pool facility.

The plumbing fixture count for a facility in Illinois only includes restrooms that have the following conditions: a water closet, a lavatory, and a shower.  Changing rooms which do not have all of this items are not included and will not be counted.

Powered by BetterDocs